It
may be desirable to have more than one camera installed
for monitoring, but doing so might involve a lot of additional
hardware just to allow more than one camera to operate with
i-Catcher Console, or to have more than one i-Catcher Sentry
running.
i-Catcher
Video Server is a solution to this hardware problem. i-Catcher
Video Server operates directly with multi-port Osprey Video
capture cards, and presents each of these ports as a single
network video source, allowing a single computer to cycle
the video source between four video feeds per instance of
i-Catcher Video Server.
For
example using the Osprey-100 which has four composite video
inputs, you can view four video sources. You can only access
one video input on a Osprey card at a single time so i-Catcher
Video Server software constantly cycles from port to port
allowing you to monitor each video input providing approximately
two to four frames per second which is ideal for security
and monitoring applications.
You
can increase the number of sources a single computer can
monitor, up to sixteen if you install four Osprey-100 cards.
You simply enter the host, port, and address of the specific
camera into i-Catcher Sentry or Console, and i-Catcher Video
Server runs transparently like any other local or network
video source.
i-Catcher
Video Server is fully configurable, and takes advantage
of all the features your Osprey Video card provides such
as differing image sizes, video signal formats, interlaced/non-interlaced
images, and brightness and contrast. As with all i-Catcher
products, the embedded web server that is used to serve
video images is not bound to any particular internet address
or host port, so it won't conflict with your existing software.
i-Catcher
Video Server is also fully automated. An automatic start
option, along with automatic minimize options ensures that
i-Catcher Video Server can start up without user interaction,
providing a fully automated and recoverable solution for
your needs. Also included is a security feature to prevent
accidental changing of settings, or tampering by other users.
You
can buy the full version of i-Catcher Video Server, or you
can download a registration key that will give you full
unlimited access for 21 days, after which i-Catcher Video
Server will drop to a demonstration mode, and will have
limited functionality.
Please
note that i-Catcher Video Server designed to work with Osprey
Video capture cards. i-Catcher Video Server needs to access
the Osprey card directly in order to switch the video ports
while capturing. Please make sure you have one of the following
Osprey Video cards before you buy:
Current
Osprey Cards:
• Osprey-100
• Osprey-210
• Osprey-220
• Osprey-230
• Osprey-500 DV
• Osprey-560 |
Legacy
Osprey Card Models:
• Osprey-200
• Osprey-500 Family
• Osprey-540
• Osprey-2000 Family |
i-Catcher
Video Server is supplied free of charge when you purchase
the Osprey-100 Security Bundle.
System
Requirements:
- Windows
NT4/2000/XP
- Pentium
II 350 MHz processor or better
- Minimum
64MB memory (128 recommended)
- Osprey
Video Capture Card (Osprey-100 recommended for four port
capture) with Osprey's VfW (Video for Windows) Drivers
- Video
Camera(s)
Since
you will receive an activation key when you purchase i-Catcher
Video Server, it is not possible to return the software.
If you are not yet sure of your purchase do not proceed
and evaluate the software beforehand.
FREE
21-Day Trial - Download Now!
If
you have additional questions, contact us at [email protected]
or call toll-free (US only) at 800.540.4119 or (international)
+1.972.488.7200. |