| Posted: August 12 2004 at 3:43pm | IP Logged
|
|
|
Unfortunately it is not possible to make the input channel selection from the Real Producer interface. Instead, select the Osprey card as the audio recording device and make the input selection via Windows Mixer. To do this m make certain that the Osprey is the preferred recording device in Windows click the Windows Start Button>Control Panel> MultiMedia (the term MultiMedia may vary - sometimes showing up as Audio - depending on the version of windows you are running, but the dialog should be as described) . The Osprey should be listed as the preferred device for recording and "Use preferred devices only" should be selected (leave the preferred playback device set to the soundcard not the Osprey placeholder).
Next, be sure that the Osprey is also configured in the mixing panel for the audio input which you are using. To do this, click the Windows Start button>Programs>Accessories>Entertainment>Volume Control (or, if there is a speaker icon in the system tray just double-click that) then click the Options Menu>Properties and be sure that the mixer device is the Osprey and select Adjust volume for Recording (make sure all of the available inputs have a check mark next to them before clicking OK to apply). This will give you a new mixer panel with all of the options for the Osprey. Make sure the input you are using is selected and that the slider is adjusted appropriately. Then, open RealProducer again and configure your stream using the left open mixer panel to change between inputs and adjust recording levels.
|
Active Topics
Memberlist
Search
Help
Register
Login
Topic: Can�t select balanced inputs with Real
